Remote Check 1.0

Minimum System Requirements:

- 486SX CPU with 4 MB RAM (12 MB for NT)
- 1 MB free disk space
- Microsoft Windows 95, Windows 98, or NT 4.0
- Properly installed modem and telephone service,
  or an unused serial port for direct connection

Remote AMI Instrument Requirements:

- AMI Model 184, 185, 186, 134, 135, or 136
- Installed RS-232 (or RS-422) option
- An optional modem configured for auto-answer and
  connected to telephone service

Remote Check is a Win32-based application for
remotely checking AMI Model 184, 185, 186, 134,
135, and 136 instruments.

Remote Check requires either a direct serial
connection, or a direct-dial telephone line and a
modem, for each targeted instrument.

If checking is performed by the host computer via
telephone, the host computer will also require a
modem. The modem speeds may be as low as 2400 baud,
but 9600 baud is recommended. Higher-speed modem
connections are not required or necessary.

Features:

- Provides a customized list of various AMI models
  as defined by the user.

- Queries the instrument for the present level
  measurement and alarm states.

- Allows quick visual check of the last level
  measurement and alarm states for each instrument
  without establishing a dial-up link.

- Provides the ability to send new instrument
  settings, or query for the present settings.

- Uses the standard TAPI interface provided by the
  operating system.