Multi-Axis

Multi-Axis Magnets (2-axis and 3-axis)

Those applications that require changing field orientation in relation to the experimental sample at very low temperatures may be a good candidate for a multi-axis system. Standard mechanical sample positioning at mK range temperatures is difficult at best and can introduce significant unwanted heat leak. In the MAxes^TM Systems a solenoid produces the highest field while the split coil sets produce a lower and typically symmetric lower field. Additional coils can be added for producing low field regions, gradients or modulated fields.

Multi-axis magnet systems are also useful for creating perfect alignment of the magnetic field with a thin film sample or lattice structure within a sample, the orientation of which may not be perfectly known. While electronically manipulating the magnetic field the sample parameters can be monitored for indications of peak alignment.

Standard MAxes^TM-2 and MAxes^TM-3 multi-axis magnet systems are listed below. Non-standard magnet systems can be custom designed upon request. All magnets listed are rated for simultaneous coil operation to the limits shown. Higher fields may be available by special request. Cryogen free systems CF MAxes^TMand Optical systems OptiMAxes^TMare also available.

Standard MAxes^TM -2 ( 2-axis magnet systems)

Fields
@4.2K (Tesla) Resultant Max. Field Vector Homogeneity
(in 1 cm DSV) Clear Bore Size (inches)

1.0" 1.25" 1.5" 1.75" 2.0" 2.5"

9T/3T 0.5 Tesla ą 0.1%/0.5%
√
√ √ √ √ √

9T/2T 1.5 Tesla ą 0.1%/1% √ √ √ √ √ √

7T/2T 1.5 Tesla ą 0.5%/2% √ √ √ √ √ √

Standard MAxes^TM -3 (3-axis magnet systems)

Fields
@4.2K (Tesla) Resultant Max. Field Vector Homogeneity
(in 1 cm DSV) Clear Bore Size (inches)

1.0" 1.25" 1.5" 1.75" 2.0" 2.5" 3.0" 3.5"

8T/1T/1T 1 Tesla ą 0.5%/2%/2%
√
√ √ √ √

7T/1T/1T 1 Tesla ą 0.15%/1.5%/1.5% √ √ √ √ √ √ √

7T/3T/0.5T 0.5 Tesla ą 0.5%/1%/1% √ √ √ √

2T/1T/1T 1 Tesla ą 2%/2%/2% √ √ √ √ √ √ √ √

Back to Superconducting Magnet Systems page

Fields @4.2K (Tesla)	Resultant Max. Field Vector	Homogeneity (in 1 cm DSV)	Clear Bore Size (inches)
Fields @4.2K (Tesla)	Resultant Max. Field Vector	Homogeneity (in 1 cm DSV)	1.0"	1.25"	1.5"	1.75"	2.0"	2.5"
9T/3T	0.5 Tesla	ą 0.1%/0.5%	√	√	√	√	√	√
9T/2T	1.5 Tesla	ą 0.1%/1%	√	√	√	√	√	√
7T/2T	1.5 Tesla	ą 0.5%/2%	√	√	√	√	√	√