Model 4Q05100PS Features
The AMI Model 4Q05100PS is designed to provide a compact, 4-quadrant capability for AMI power supply systems. The Model 4Q05100PS is designed to operate with the AMI Model 420 Power Supply Programmer.
The power supply operates as a voltage-input controls the voltage-output supply only (voltage-voltage mode). No means of direct current output control is provided.
The Model 4Q05100PS is a true four-quadrant power supply. Transitions through zero current are achieved electronically and require no mechanical switching device of any kind, nor is any pause required of the system when passing through zero current.
Specifications Input power: 100-120 or 200-240 VAC ±10%, 47 to 63 Hz DC Output Current/Compliance: See Graph 1 below Power-Absorbing Mode* Rating: See Graph 2 below Output Overvoltage Protection: ± 6 VDC (nominal) Ambient Temperature Rating: 0 to 40 °C PROGRAM IN Control Signal: -10 to +10 VDC ** Output Voltage Noise: 0.6 mV RMS into 20 MHz BW (typical)
10 mV p-p into 20 MHz BW (typical)
75 mV p-p into 20 MHz BW (maximum)Dimensions: 3.4" H x 19" W x 19.25" D
(Allow additional 1.25" front clearance for handles)Weight: 18.5 lbs.
* Unit is in power-absorbing mode when the polarity of the
output
voltage is opposite the polarity of the current flow.
** Gain of 0.5 applied to voltage output of the unit.
Rev. 3 Manual in Adobe Acrobat 3.0 format (mn-4qps.pdf, 286 KB)
Back to Superconducting Magnet
Systems page
AMI HomePage |
Sales | Superconducting
Magnets | Liquid Level Instrumentation
Technical Support | Customer
Services | AMI Picturebook | E-Mail AMI
